Payment & Shipping Terms:
|Application:||E-bike,LED Lights,Solar ,UPS,Scooter ,Motor||Cell Inside:||3.2V 3300mAh 26650 LiFePO4 Cells|
|Cell Combine:||4S12P-48PCS Cells||BMS Inside:||12V 4S 30A|
Solar and Wind Energy Cylindrical Lithium LiFePO4 Battery Pack 12V 40Ah 480WH
Solar and Wind Off Grid systems
PV Solar panel for solar off-grid and tied-grid systems
The batteries used to store solar and wind energy are currently mainly lead-acid batteries. Short lifespan and low cycle number of lead acid batteries make it a weak candidate for environment and cost efficiency.
Lithium-Ion batteries allow to equip solar or wind “off-grid” power stations, replacing the legacy banks of lead-acid batteries.
A lifetime (number of cycles) well above the lead-acid batteries (over 1500 cycles at 90% depth of discharge)
Footprint and weights 2-3 times lower than lead-acid
No maintenance required
Compatibility with installed equipment (charge controllers, AC converters, etc.) by using advanced BMS
Green solutions (non-toxic chemistries, recyclable batteries)
PowerTech Systems offers a range of 12V, 24V and 48V Lithium-Ion battery pack to meet most of our customer needs.
HKANON battery offer a high level of safety through the use of Lithium Iron Phosphate cylindrical cells and a built-in BMS.
HKANON batteries can be discharged up to 100% and have a minimum operation life of 2000 charge/discharge cycles.
HKANON offer flexible and modular solutions to meet all types of applications (voltage, capacity, sizing). The implementation of these batteries is simple and fast, with direct drop-in of legacy battery banks.
The Lithium-Ion battery 12V-40Ah offers high level of safety through the use of cylindrical cells in Lithium Ferro Phosphate technology (LiFePO4 or LFP).
12V-40Ah integrates an innovative Battery Management System (BMS) in its casing to ensure a very high level of safety in use. The BMS constantly monitors and balances the battery cells to protect the battery and increase its life. The BMS also protects the battery from any misuse: deep discharge, high charging voltage, etc.
The range has been designed to replace lead-acid batteries advantageously, by offering a quadrupted energy density for an equivalent weight and size.
Thanks to its technology, the lithium battery 12V-40Ah can be installed in any position (vertically, lying on the side or head down).
The electrical parameters of the PowerBrick+ lithium battery 12V-40Ah are compatible in all respects with those of an AGM lead battery of 12V. In the vast majority of cases, the charging system can be kept the same and no additional accessories are required to perform the replacement.
The Lithium battery 12V-40Ah has a nominal voltage of 12.8V. It can be easily assembled in series (up to 4 batteries in series) and in parallel (up to 4 batteries).
The voltage of the final assembly can be from 12V and up to 48V (for 4 packs assembled in series), which meets the needs of almost all electrical applications in traction, solar or wind storage, marine, robotics, trolleys, etc.
The battery is protected by a waterproof ABS case, splash and dust resistant (Protection index IP65).
3.2V 3300mAh 26650 LiFePO4 cells
|Max continuous load current (23°C)
Peak load current (30s)
Cut-off voltage (BMS)
|Max charge voltage (CCV)||14.6V|
|Min discharge voltage||10.8V|
|DC internal resistance||30 mOhm|
|Charge Temperature Range||0-45C|
|Discharge Temperature Range||-20-60C|
12V 4S 30A
|Case||IP65 ABS Case|
|Charging cycles||+2000 times|
|Features||Lightweight ,small size ,easy to carry|
Contact Person: Sales Manager