Payment & Shipping Terms:
|Name:||24v 60ah Lifepo4 Battery||Cell:||3.2V 60Ah(75Ah)|
|Cell Combine:||8S1P-8PCS||BMS Inside:||24V 8S 100A|
24v li ion battery pack,
24v lithium battery pack
24V 60Ah LiFePO4 car Battery Replacement
|Specifications||24V 60Ah LiFePO4 battery|
|Cell specification||3.2V 60Ah LFP cell|
|Cell combination||8S1P-8PCS cells|
|Type||1.5kwh lithium battery|
|Discharge cut-off voltage||21.6V|
|Charge cut off voltage||29.2V|
|Rated discharge current||100A|
|Peak discharge current||150A|
|Max continuous charge current||0.5C-30A|
|Peak charge current||1C-60A|
|Charge Temperature Range||0-45C|
|Discharge Temperature Range||-20-60C|
|Charging cycles||More than 2500 times|
|Application||Electric scooter ,bike ,bicycle ...|
Knowledge of battery
One of the main causes of danger for lithium-ion cells is related to the phenomenon of thermal runaway. This is a heating reaction of the battery in use, caused by the nature of the materials used in the chemistry of the battery.
Thermal runaway is mainly caused by the solicitation of batteries under specific conditions, such as overload under adverse climatic conditions. The result of a thermal runaway of a cell depends on its level of charge and can lead in the worst case to an inflammation or even an explosion of the Lithium-Ion cell.
However, not all types of Lithium-Ion technology, due to their chemical composition, have the same sensitivity to this phenomenon.
The figure below shows the energy produced during an artificially induced thermal runaway
It can be seen that among the Lithium Ion technologies mentioned above, LCO and NCA are the most dangerous chemicals from a thermal runaway point of view with a temperature rise of about 470°C per minute.
The NMC chemistry emits about half the energy, with an increase of 200°C per minute, but this level of energy causes in all cases the internal combustion of materials and the ignition of the cell.
In addition, it can be seen that LiFePO4 – LFP technology is is slightly subject to thermal runawayphenomena, with a temperature rise of barely 1.5°C per minute.
With this very low level of energy released, the thermal runaway of the Lithium Iron Phosphate technology is intrinsically impossible in normal operation, and even almost impossible to artificially trigger.
Combined with a BMS, Lithium Iron Phosphate (LifePO4 – LFP) is currently the most secure Lithium-Ion technology on the market.
Like thermal runaway, Lithium-ion cells have a different level of safety depending on the shocks or mechanical treatments they may undergo during their lifetime.
The nail penetration test is the most revealing way to qualify the safety of a cell technology.
The test presented below is performed by perforating a Lithium Ion NMC cell and a Lithium Ion LiFePO4 cell.
We find here the same extremely stable behavior of Lithium Iron Phosphate cells while the NMC cell ignites almost immediately.
For information, the LCO, NCA, or Lithium Polymer cells have a similar behavior to the NMC in a perforation test (immediate inflammation)
Contact Person: Sales Manager